Halo Installation

I have had a new broadband/fibre router, new broadband/fibre provider, or changed Wi-Fi password Wi-Fi Network.

The Smart interface can take up to 30 seconds to show in your Wi-Fi network list.

Yes, however the Halo Wi-Fi will use your local external temperature as default via the Halo App. If you want to use the Halo Wi-Fi with external weather compensation, then please disable the app weather compensation feature.

Yes, this can be inputted during the auto-setup sequence or, if required at a later date, can be inputted or altered via the settings menu.

Advanced settings should only be adjusted by a competent person; the wrong configuration can have a detrimental effect on the thermostat and the heating system.

• Optimised start - Boiler starts heating in advance of schedule so heating reaches the required temperature at the time specified Default: OFF

• Optimised stop - Boiler stops heating in advance of schedule so heating reaches the required temperature at the time specified Default: OFF

• Delayed Start - If the room temperature is close to target temperature the heating start time is delayed saving energy Default: OFF

• Display Tolerance - Select the display tolerance of the room temperature. Can beset at increments of 0.5 or 0.10C Default: 0.10C

• Temperature offset - Fine tune the room temperature displays -2.5 to 2.50C Default: 0

• Daylight saving time - Automatically move to daylight saving Default: ON

• Frost protection - The temperature that will used when to protect your home when the thermostat is off. Can be set 5 to 17°C Default: 50C

• Service phone number - Opportunity to input Installer contact number for service reminders Default: +35319617700.

The boiler starts heating in advance of schedule, so heating reaches the required temperature at the time specified.

The boiler stops heating in advance of schedule, so heating reaches the required temperature at the time specified.

If the room temperature is close to target temperature the heating start time is delayed saving energy.

This is advising your smart interface has no connection to the cloud.

Ensure that the router is connected to the internet. This could be tested by web browsing on a tablet or PC that normally uses the router to connect to the internet. Avoid testing internet with mobile phone that may use mobile network to connect to internet. Contract your broadband / fibre provider for help if internet is not working.

Your smart interface has been put into access point mode. This is done by pressing the override button for 5 seconds. Another 5 second press will reverse this mode.

The Halo will need to reconfigure to connect to the new Wi-Fi network following the steps below.

To connect your Halo, you need to have the Ideal Halo App installed.